THREE-DIMENSIONAL MODEL OF A HIP PROSTHESIS

  • Razvan Cristian VADUVA University of Medicine and Pharmacy of Craiova
  • Ilaria Lorena PETROVICI University of Medicine and Pharmacy of Craiova
  • Mihai Catalin TENOVICI University of Medicine and Pharmacy of Craiova
  • Danut Nicolae TARNITA University of Medicine and Pharmacy of Craiova
  • Dragos Laurentiu POPA University of Craiova
  • Daniel Cosmin CALIN University of Medicine and Pharmacy of Craiova
  • Otilia ROGOVEANU University of Medicine and Pharmacy of Craiova
Keywords: Virtual hip, hip prosthesis, CAD methods, virtual arthoplasty, virtual bones

Abstract

Serious pathological problems of the hip joint can be solved surgically, in some cases by joint prosthesis. For this reason, it is very important to be able to shape, in a first phase, the components of the prosthesis, which can then be tested virtually. For this purpose, the components of the prosthesis with fixation pins were firstly scanned three-dimensionally. This operation resulted in a model of a "cloud of points" which was subsequently transformed into virtual surfaces, then into virtual solids. These virtually solid components were assembled in a parameterized virtual environment. This prosthesis can be inserted into a biomechanical model of the hip joint and tested using the finite element method. At the end of the paper important conclusions were drawn.

Author Biographies

Razvan Cristian VADUVA, University of Medicine and Pharmacy of Craiova

University of Medicine and Pharmacy of Craiova

Ilaria Lorena PETROVICI, University of Medicine and Pharmacy of Craiova

University of Medicine and Pharmacy of Craiova

Mihai Catalin TENOVICI, University of Medicine and Pharmacy of Craiova

University of Medicine and Pharmacy of Craiova

Danut Nicolae TARNITA, University of Medicine and Pharmacy of Craiova

University of Medicine and Pharmacy of Craiova

Dragos Laurentiu POPA, University of Craiova

University of Craiova, Faculty of Mechanics

Daniel Cosmin CALIN, University of Medicine and Pharmacy of Craiova

University of Medicine and Pharmacy of Craiova

Otilia ROGOVEANU, University of Medicine and Pharmacy of Craiova

University of Medicine and Pharmacy of Craiova

References

1 Anderson, L.D., Hamsa, W.R., Waring, T. L. (1964). Femoral head protheses, J. Bone Joint Surg., 46A, pp. 1049-1065.
2 Buciu, G., Popa, D.L., Grecu, D., Niculescu, D., Nemes, R. (2012). Virtual comparative study on the use of nails at the fixation of tibial fractures using finite element method, Proceedings of The 4th International Conference Advanced Composite Materials Engineering COMAT 2012, Lux Libris Publishing House, pp.381-386, ISBN 978-973-131-162-3, Brasov Romania.
3 Botez, P. (1999). Nos options pour le choix d’implant dans la necrose aseptique de tete femorale stade III et IV, The 2nd Balkan Congress of Orthopaedics and Traumatology combined with The 8th International S.O.R.O.T. Congress of Orthopaedic and Traumatology (AOLF Session), lasi, România.
4 Ciunel, S., Duta, A., Popa D.L., Popa-Mitroi, G., Dumitru, V.C. (2014). The Behavior of the Virtual Human Head-Neck System during the Main Movements, Applied Mechanics & Materials, no.657, pp. 780-784.
5 De Lee J. C. (1990). Fractures and dislocation of the hip, Rockwood and Green’s - ,,Fractures in Adults”, Ed. Lippincott-Raven, Philadelphia, U.S.A.
6 FIoares, G., Botez, P., Popescu L. (1991). Our experience in the surgical treatment of femoral neck fractures (in Romanian), SOROT, Craiova.
7 Follaci, F. M., Charnley, J. (1969). A comparation of the results of femoral head prothesis with aria without cement, CIin. Orthop., 62, pp.156-161.
8 http://www.geomagic.com/en/ Accessed: 2018-12-11.
9 Lortat-Jacob, A., Videcoq, P. H., Hardy, P. H., Fontes, D., de Somer, B., Benoid, J. (1992). La prothese Intermediare dabs las fractures du col du femur, Rev. Chir. Orthop., 78, pp.191-200.
10 Popa A.D., Mogosanu A.M., Popa D.L., Duta A., Teodorescu A., (2017). Virtual and rapid prototyping methods applied in civil engineering: Snow, wind and earthquake simulations on a five storey building, FME Transactions, vol. 45, no. 2, pp. 276-282.
11 Popa, D.L., Buciu, G., Grecu, D., Niculescu, D., Chiutu, L., Stoica, M., (2013). Studies about virtual behavior of tibia fractures and nails during the fixation process, JIDEG, no.8, pp. 5-10.
12 Popa, D., Duta, A., Pitru, A., Tutunea, D., Gherghina, G. (2013). About the Simulation Environment for Dental Implant Studies, Scientific
Bulletin of the POLITEHNICA University of Timisoara HIDROTEHNICA Series, vol. 58, pp. 137-141.
13 Popa, D., Tarnita, D., Iordachita I. (2005). Study method for human knee applicable to humanoid robots, Proceedings of The 14th International Workshop on Robotics in Alpe-Adria-Danube Region, RAAD, vol.5, pp.26-28.
14 Popa, D., Tarnita, D.N., Tarnita, D., Grecu, D. (2005). The generation of the three-dimensional model of the human knee joint, Romanian Journal of Morphology and Embryology, vol.46, no.4, pp. 3-6.
15 Tarnita D., Tarnita D.N., Bizdoaca N., Popa D. (2009). Contributions on the dynamic simulation of the virtual model of the human knee joint, Materialwissenschaft und Werkstofftechnik: Entwicklung, Fertigung, Prüfung, Eigenschaften und Anwendungen technischer Werkstoffe, vol. 40, no. 1-2, pp. 73-81.
16 Tarnita D., Tarnita D.N, Bolcu, D. (2011). Orthopedic implants based on shape memory alloys, chapter in Biomedical Engineering – From Theory to Applications, InTech Publishing House, pp.431-468, ISBN: 978-953-307-283-8, Viena.
17 Vatu, M., Craitoiu, M.M., Vintila, D., Mercut, V., Popescu, M.S., Scrieciu, M., Popa, D.L. (2018). Determination of resistance forces from mandibular movements through dynamic simulation using kinematic analysis and finite elements method, Romanian Journal of Oral Rehabilitation, Vol. 10, Issue 1, pp. 20-28.
18 Vatu, M., Vintila, D., Popa, D.L. (2018). 3D Skull Virtual Model Based on CT or MRI Images Used for Dentistry Simulations, Applied Mechanics and Materials, Vol. 880, pp. 101-110.
Published
2019-05-19
How to Cite
VADUVA, R. C., PETROVICI, I. L., TENOVICI, M. C., TARNITA, D. N., POPA, D. L., CALIN, D. C., & ROGOVEANU, O. (2019). THREE-DIMENSIONAL MODEL OF A HIP PROSTHESIS. Journal of Industrial Design and Engineering Graphics, 14(1), 203-206. Retrieved from http://www.sorging.ro/jideg/index.php/jid/article/view/459
Section
Articles

Most read articles by the same author(s)