OPTIMIZING THE FORMS AND DIMENSIONS OF A FIELD CULTIVATOR WORKING KNIVES

  • Andrei KIRALY Technical University of Cluj-Napoca
Keywords: Field cultivator, Optimization of working bodies

Abstract

The paper presents some considerations regarding the optimisation of working bodies of a field cultivator for soil preparation also known as combiner. Calculations in deformable body mechanics, thermal conduction, dynamic analysis, etc. lead to global systems of equations with many unknowns. The solution of these equation systems is dependent on the electronic computer, which have a great deal of efficiency compared to the matrix formulations of the problems.

Author Biography

Andrei KIRALY, Technical University of Cluj-Napoca

Technical University of Cluj-Napoca, Department of Automotive Engineering and Transports

References

1 Budoi, G., Penescu, A. (1996) Agrotehnica, Editura Ceres, ISBN 973-40-0358-5, Bucuresti, 1996.
2 Challen, J.M. şi Oxley, P.L.B. (1979) An explanation of the different regimes of friction and wear using asperity deformation models, ISSN 0043-1648,Wear, nr. 53, pag.229.
3 Childs, T.H.C. (1970), The sliding of rigid cones over metals in high adhesion conditions, Int. J. Mech. Sci. nr.12, , pag. 393.
4 Deacu, L. ş.a., (1992) Bazele Aschierii si Generarii Suprafetelor, Cluj-Napoca, Lito UTC-N,
5 Gilormini, P. şi Felder, E. (1983) Theoretical and experimental study of the ploughing of a rigidplastic semi-infinite body by a rigid pyramidal indenter, Revista Wear, nr.88, ,pag.195
6 Ilea, H. (1982) Analiza numerica si determinari experimentale in inginerie, vol.l, Element finit, Transilvania Press, Cluj-Napoca, 1996
7 Ionut, V., Moldovanu, Gh. (1987) Tehnologia repararii si fiabilitatea utilajului agricol, Bucuresti, Editura Didactica si Pedagogica.
8 Kiraly, A., (2002) Grafica Inginereasca, Editura U.T.PRESS, ISBN 973-8335-35-3, Cluj-Napoca.
9 SHIH, A.J. (1996) Finite element analysis of the rake angle effects in orthogonal metal cutting, J. Mech. Sci. Vol.38, Nr.1, Elsevier Science Ltd, 1996, pag.1-17.
10 SolidWorks 2019, Reference Manual, 3000 Ocean Park Boulevard, Santa Monica, 2001Suite, CA 90405-3030
11 Voda, V.G., (1980) Noi modele ale durabilitatii produselor, Editura Academiei, Bucuresti, 1980.
Published
2019-05-22
How to Cite
KIRALY, A. (2019). OPTIMIZING THE FORMS AND DIMENSIONS OF A FIELD CULTIVATOR WORKING KNIVES. Journal of Industrial Design and Engineering Graphics, 14(1), 71-74. Retrieved from http://www.sorging.ro/jideg/index.php/jid/article/view/480
Section
Articles