INNOVATION APPROACHES CENTERED ON SENSORY DESIGN. A CASE STUDY.
Keywords:
Innovation, kitchen appliances, sustainability, multifunctional, sensory designAbstract
When discussing a new product, user-centered innovation plays an important role. By prioritizing the needs and preferences of the intended audience, companies can develop products that satisfy both functional and emotional requirements. The evolution of kitchen appliances highlights the influence of technological progress and changing lifestyles on product design, transitioning from basic constructions to smart devices connected to the internet. The purpose of this article is to present an innovative design for a multifunctional kitchen appliance, which combines two commonly used kitchen appliances, a bread toaster, and a sandwich maker. Our contribution lies in providing a multifunctional appliance that integrates sensory design, advanced technology, ergonomic design, and intuitive controls. Through strategic innovation management and a focus on user-centered design, this appliance represents a synthesis of utility, aesthetics, and sustainability. To achieve the objectives of this article, a detailed analysis of existing literature in the field was conducted.
Downloads
References
Sossou, G., Demoly, F., Gomes, S., Montavon, G.
(2022). An Assembly-Oriented Design Framework for
Additive Manufacturing. Designs 2022, Vol.6, No.20.
Innovation Approaches Centered on Sensory Design
JOURNAL OF INDUSTRIAL DESIGN AND ENGINEERING GRAPHICS 167
Berry, K., Brown, E.M., Pothier, B., Fedorka, S.,
Akyurtlu, A., Armiento, C., Walsh, G.F., Shemelya,
C. (2022). Overcoming Variability in Printed RF: A
Statistical Method to Designing for Unpredictable
Dimensionality. Designs 2022, Vol. 6, No. 13.
Liu, J., (2023). Ideal Electronic Technology,
available at: www.ietcharger.com Accessed: 2023-05-
Chacón, A., Ponsa, P., Angulo, C. (2021). Usability
Study through a Human-Robot Collaborative
Workspace Experience. Designs 2021, Vol. 5, 35.
J.H. Wu, A design methodology for form-based
knowledge reuse and representation, Inform.
Manage. 46 (7) (2009) 365–375.
T. Wuest, Product requirement modeling and
optimization method based on product configuration
design, Procedia CIRP 36 (45) (2015) 1–5.
A-M Avramescu, The ecological design of a 3 in 1
electrical household appliances: microwave, toaster
and sandwish toaster, ISB-INMA-THE 2015, 611-
P. Jerzy, O. Konrad, P. Jaroslaw, et al., Conceptual
and detailed design knowledge management in
customized production-Industrial perspective, J.
Comput. Design Eng. 6 (4) (2019) 479–506.
K. Halskov, N.B. Hansen, The diversity of
participatory design research practice at PDC 2002–
, Int. J. Hum Comput Stud. 74 (2015) 81–92.
Avramescu, A., (2023). The Importance and
Necessity of New Bio-Based Materials in Industrial
Design, Materiale Plastice, 60 (1), pp. 121-127.
K.Y. Lin, C.F. Chien, R. Kerh, UNISON framework
of data-driven innovation for extracting user
experience of product design of wearable devices,
Comput. Ind. Eng. 99 (2016) 487–502.
Ana-Maria AVRAMESCU, A sensorial and
instrumental investigation on the performance of biobased material versus synthetic material; U.P.B. Sci.
Bull., Series B, Vol. 85, Iss. 3, 2023, ISSN 1454 –
, pp. 207-218.
Nicolau A-M. Sustainable Perspectives Using
Human Beings: The Sensory Properties of a BioBased Material Compared to a Synthetic Material—
An Overall Assessment Based on an Innovative Blind
Method. Sustainability. 2023; 15 (12):9145.
T. Hartmann, A. Trappey, Advanced engineering
Informatics - Philosophical and methodological
foundations with examples from civil and
construction engineering, 100020.1-100020.7,
Develop. Built Environ. 4 (2020).
AVRAMESCU A.-M., Etude prospective sur
l’exploitation des materiaux naturels compares aux
materiaux synthetiques, U.P.B. Sci. Bull., Series B,
Vol. 85, Iss. 1, 2023, pp. 235-247.
www.beko.ro Accessed: 2024-03-23
Cabeza-Lainez, J. et al. (2022). New Simulation
Tool for Architectural Design in the Realm of Solar
Radiative Transfer. Designs 2022, Vol. 6, 72.
AVRAMESCU, A.-M., Physical properties of the
ecological materials versus artificial materials;
U.P.B. Sci. Bull., Series B, Vol. 77, Iss. 1, 2015 ISSN
– 2331, pp. 149-156.
Hsu C-Y, Wu T-T. Application of Business
Simulation Games in Flipped Classrooms to
Facilitate Student Engagement and Higher-Order
Thinking Skills for Sustainable Learning
Practices. Sustainability. 2023; 15 (24):16867.
Yang J, Ren G, Wang Y, Liu Q, Zhang J, Wang W,
Li L, Zhang W. Environmental Prediction Model of
Solar Greenhouse Based on Improved Harris Hawks
Optimization-CatBoost. Sustainability. 2024; 16
(5):2021.
Mooney, Q.D.; Imtiaz, M.H. Sensory Augmentation
Using Subdermal Haptic Feedback. Eng.
Proc. 2023, 31, 55.
Banzato, A.; Cerchiari, A.; Pezzola, S.; Ranucci, M.;
Scarfò, E.; Berardi, A.; Tofani, M.; Galeoto, G.
Evaluation of the Effectiveness of Functional
Chewing Training Compared with Standard
Treatment in a Population of Children with Cerebral
Palsy: A Systematic Review of Randomized
Controlled Trials. Children 2022, 9, 1876.
Allmendinger, L.; Hazubski, S.; Otte, A.
Conceptualization of an Anthropomorphic
Replacement Hand with a Sensory Feedback
System. Prosthesis 2022, 4, 695-709.
Sato, M.; Mutai, H.; Iwanami, J.; Noji, A.;
Sugimoto, S.; Ozawa, K.; Sagari, A. Difference
between the Effects of Peripheral Sensory Nerve
Electrical Stimulation on the Excitability of the
Primary Motor Cortex: Examination of the
Combinations of Stimulus Frequency and
Duration. Brain Sci. 2022, 12, 1637.
Abella, A.; Llorach-Massana, P.; Pereda-Baños, A.;
Marco-Almagro, L.; Barreda-Ángeles, M.; Clèries, L.
Perception of Recycled Plastics for Improved
Consumer Acceptance through Self-Reported and
Physiological Measures. Sensors 2022, 22, 9226.
Babailov, S.P.; Zapolotsky, E.N.; Fomin, E.S.;
Polovkova, M.A.; Kirakosyan, G.A.; Martynov, A.G.;
Gorbunova, Y.G. Structure Determination of
Binuclear Triple-Decker Phthalocyaninato
Complexes by NMR via Paramagnetic Shifts Analysis
Using Symmetry Peculiarities. Molecules 2022, 27,
Talens, C.; Llorente, R.; Simó-Boyle, L.; OdriozolaSerrano, I.; Tueros, I.; Ibargüen, M. Hybrid Sausages:
Modelling the Effect of Partial Meat Replacement
with Broccoli, Upcycled Brewer’s Spent Grain and
Insect Flours. Foods 2022, 11, 3396.
Imbesi, S.; Corzani, M.; Lopane, G.; Mincolelli, G.;
Chiari, L. User-Centered Design Methodologies for
the Prototype Development of a Smart Harness and
Related System to Provide Haptic Cues to Persons
with Parkinson’s Disease. Sensors 2022, 22, 8095.
Cheng, S.; Zhai, Z.; Sun, W.; Wang, Y.; Yu, R.; Ge,
X. Research on the Satisfaction of Beijing Waterfront
Green Space Landscape Based on Social Media
Data. Land 2022, 11, 1849.
Alraho, S.; Zaman, Q.; Abd, H.; König, A.
Integrated Sensor Electronic Front-Ends with Self-X
Capabilities. Chips 2022, 1, 83-120.
Li, W.-T.; Cheng, Y.-H. Creating Sustainable
Development of the Destination with Tea Public
Innovation Approaches Centered on Sensory Design
VOLUME 19 ? ISSUE 1? JUNE 2024
Version Packaging Design by Obtaining Relational
Space Concept. Sustainability 2022, 14, 9256.
Wang, Y.; Zhao, Q.; Chen, J.; Wang, W.; Yu, S.;
Yang, X. Color Design Decisions for Ceramic
Products Based on Quantification of Perceptual
Characteristics. Sensors 2022, 22, 5415.
G., Clarissa, Bram de Boer, M. Gabbay, C. Watkins,
N. Wilson, H. Tetlow, and H. Verbeek. 2022.
Developing a Meaningful Garden Space in a Care
Home with Staff and Family Members: A Qualitative
Study International Journal of Environmental
Research and Public Health 19, no. 12: 7025.
C., Xing, Y. Liu, S. Li, and W. Sun. 2022. Sensory
Perception Mechanism for Preparing the
Combinations of Stimuli Operation in the
Architectural Experience Sustainability 14, no. 13:
Bright, Tyrone, Sarp Adali, and Glen Bright. 2022.
Low-Cost Sensory Glove for Human–Robot
Collaboration in Advanced Manufacturing
Systems Robotics 11, no. 3: 56.
Duivon, Askan, Pino Kirsch, B. Mauboussin, G.
Mougard, J. Woszczyk, and F. Sanfilippo. 2022. The
Redesigned Serpens, a Low-Cost, Highly Compliant
Snake Robot Robotics 11, no. 2: 42.
Kantor, Jirí, Lucie Hlavácková, Jian Du, Petra
Dvoráková, Zuzana Svobodová, Kristýna Karasová,
and Lucia Kantorová. 2022. The Effects of Ayres
Sensory Integration and Related Sensory Based
Interventions in Children with Cerebral Palsy: A
Scoping Review Children 9, no. 4: 483.
Avramescu A.-M., Petcu P., Constantin I.-M.
(2023), Integrating the human factor and
enviromental needs in the design of a new product,
International Journal of Manufacturing Economics
and Management No. 2 / 2023:46.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
